Lewitt LCT 940

Artikkelnr.: LCT940-LW

Stormembran mikrofon med rør.

PrisNOK15 995,00 inkl. mva.
  • Produktinfo
  • Tekniske data
  • Produktanmeldelser (0)
Sound professionals naturally rely on a set of different high-end microphones in order to get the best out of their sound. But changing microphones and adjusting settings takes valuable time, the creative flow of a session is interrupted. With its new Authentica series flagship LCT 940, LEWITT now introduces a microphone that will revolutionize modern studio recording procedures and help engineers and artists to react more quickly to a desired change of style and sound.
 
The LCT 940 combines the specific characteristics of a premium large-diaphragm FET condenser microphone and a top-notch tube microphone in one housing. Basically, users can choose between the two main settings "FET" and "Tube". These two signal paths have been incorporated separately and work independently of each other.
 
"Tube" delivers the classic, warm and rich tube sound, while "FET" stands for the clear, exceptionally rich and nuanced sound LEWITT condenser microphones are renowned for. However, the LCT 940 offers another unique feature that true recording enthusiasts will swoon over: As the characteristics of the two main settings can be mixed and merged continuously variable, the LCT 940 opens up huge creative possibilities for artists and producers.
 
Furthermore, the LCT 940 features a total of nine different polar patterns – our five "standard" polar patterns omni-directional, cardioid, figure-8, wide- and super-cardioid and four additional intermediate patterns. The microphone features four levels of attenuation and four switchable high-pass filters, LEDs and push buttons for noiseless handling on the PSU. Automatic attenuation and clipping history round off the outstanding feature list of the LCT 940.
 
Rich in advanced technological features, the LCT 940 opens up a new dimension of sound reproduction in demanding professional studio applications. Its unrivaled set of qualities makes this microphone a must-have for recording pros who strive for nothing less than perfection.

Acoustical operating principle  pressure gradient transducer, externally polarized
Transducer Ø  25,4 mm, 1 inch
Directional pattern  omni, broad-cardioid, cardioid, super-cardioid figure-8 and four additional intermediate pattern
selectable on remote control
Frequency range  20 ... 20.000 Hz
Sensitivity  23 mV / Pa (-33 dBV), cardioid
20 mV / Pa (-34 dBV), omni
23 mV / Pa (-33 dBV), figure-8
Signal / noise ratio (FET)  86 dB-A
Signal / noise ratio (Tube)  82 dB-A
Equivalent noise level (FET)  8 dB-A, cardioid (IEC 61672-1)
9 dB-A, omni (IEC 61672-1)
8 dB-A, figure-8 (IEC 61672-1)
Equivalent noise level (Tube)  12 dB-A, cardioid (IEC 61672-1)
13 dB-A, omni (IEC 61672-1)
12 dB-A, figure-8 (IEC 61672-1)
Dynamic range of FET mic. Amp.  135 dB-A
Dynamic range of Tube mic. Amp.  128 dB-A
Max. SPL for 0,5 % THD (FET)  143 dB, 0 dB pre-attenuation
149 dB, 6 dB pre-attenuation
155 dB, 12 dB pre-attenuation
161 dB, 18 dB pre-attenuation
Max. SPL for 0,5% THD (Tube)  140 dB, 0 dB pre-attenuation
146 dB, 6 dB pre-attenuation
152 dB, 12 dB pre-attenuation
158 dB, 18 dB pre-attenuation
Pre-attenuation pad  6 dB, 12 dB, 18 dB
selectable on remote control
Bass cut filter slope  12 dB / octave at 40 Hz
6 dB / octave at 150 Hz
6 dB / octave at 300 Hz
selectable on remote control
Rated impedance  < 200 ohms
Rated load impedance  > 1.000 ohms
Supply voltage  custom power supply unit
230 V, 50 Hz
110 V, 60 Hz
Current consumption  170 mA
Connector  gold plated 11-pin XLR
Cable  8 m (26 ft)11-pin audio cable, oxygen-free copper
Dimensions (Mic)  192 x 60 x 46 mm, 7,5 x 2,4 x 1,8 inch
Dimensions (PSU)  250 x 150 x 70 mm, 9,8 x 5,9 x 2,8 inch
Net weight (Mic)  662 g, 23,3 oz
Net weight (PSU)  1930 g, 68,1 oz

Skriv en produktanmeldelse og del dine erfaringer med dette produktet med andre kunder.