Lewitt LCT 640 TS

Artikkelnr.: LCT640TS-LW

Twin system med dual output mode.

PrisNOK9 495,00 inkl. mva.
  • Produktinfo
  • Tekniske data
  • Produktanmeldelser (0)

Designed and engineered in Austria, LEWITT’s new LCT 640 TS will revolutionize the way we think about the recording process. Set to Dual Output Mode the signal of the mics front and back diaphragm is provided by independent circuitries, any kind of polar pattern can be realized dynamically - even after the recording. Already recorded material can be changed dynamically by adjusting the polar pattern - room sound can be added or decreased, even a turn by 180° is possible. After recording with the LCT 640 TS you can use LEWITT’s Polarizer plug-in to tweak the material with incredible ease of use. In Single Output Mode the LCT 640 TS has all the well-known characteristics of a great sounding studio multi-pattern condenser mic. It features five polar patterns: omni, wide cardioid, cardioid, supercardioid and figure-8. Perfect Match technology takes care that all LCT 640 TS will always form a matched pair. The Dual Output Mode allows to record Mid Side stereo with only one LCT 640 TS - usually only possible with two microphones. Clipping History, 4 low-cut and pre-attenuation settings round off the outstanding feature list of the LCT 640 TS. The LCT 640 TS opens doors to a new world of recording techniques.

Acoustical operating principle
Pressure gradient transducer, externally polarized

Diaphragm
3 micron gold sputtered Mylar

Transducer Ø
25.4 mm, 1 in

Polar pattern
selectable from Omnidirectional to Figure-8

Sensitivity
28 mV / Pa (31 dBV)

Signal / noise ratio
83 dB (A)

Equivalent noise level
11 dB (A), cardioid (IEC 61672-1)

Dynamic range of FET mic. Amp.
121 dB (A)

Max. SPL for 0.5 % THD
132 dB, 0 dB pre-attenuation

Pre-attenuation pad
-6 dB
-12 dB
-18 dB

Low-cut filter
40 Hz (12 dB/oct)
80 Hz (12 dB/oct)
180 Hz (6 dB/oct)

Input impedance
> 120 Meg ohm

Rated load impedance
> 1.000 O

Supply voltage
48 V +/- 4 V (IEC 61938)

Current consumption
5.5 mA (IEC 61938)

Mic enclosure
Zinc die cast

Connector
Gold plated 3-pin XLR

Microphone dimensions
158 x 52 x 36 mm, 6.22 x 2.04 x 1.42 inch

Microphone net weight
425 g / 14.9  oz

Skriv en produktanmeldelse og del dine erfaringer med dette produktet med andre kunder.