Lewitt LCT 450

Artikkelnr.: LCT450-LW

Stormembran mikrofon til live og studio.

PrisNOK4 595,00 inkl. mva.
  • Produktinfo
  • Tekniske data
  • Produktanmeldelser (0)

The LCT 450 steps up to the plate with the LCT 540’s capsule and thus features a natural, authentic sound with first-class transient response due to the ultra-thin, gold-layered, low-mass, 1-inch diaphragm, while its cardioid polar pattern ensures effective rear sound rejection both onstage and in the studio. It comes with two-step switchable pre-attenuation for an ear-splitting maximum SPL of 158 dB at 20 dB of attenuation. Two low-cut settings help to reduce unwanted low-frequency noise like wind, footsteps or the like.

Clever features known from flagships like the LCT 640 or LCT 940 are also onboard, including automatic attenuation and clipping history – as well as, of course, the illuminated user interface for quick and easy handling in dark environments. All this, combined with the brilliant, clear and authentic sound that characterizes our recording microphones, has been packed into our well-known LCT 240 housing to ensure that the LCT 450 isn’t too dominant as an onstage overhead; studio users, on the other hand, will appreciate the appealing look that reflects its professional inner workings.

In short: the LCT 450 has everything it needs and nothing more, so what you pay for is pure performance rather than gimmicks. The LCT 450 is LEWITT’s gateway to the world of large-membrane condenser microphones for everyone who’s looking for the best performance at an affordable price!

Acoustical operating principle pressure gradient transducer, externally polarized
Diaphragm 3 micron gold sputtered Mylar
Transducer Ø 25.4 mm / 1 inch
Polar pattern cardioid
Frequency range 20 to 20,000 Hz
Sensitivity 18 mV / Pa (-35 dBV)
Enclosure zinc die cast
Connector gold plated 3-pin XLR
Dimensions 138 x 52 x 36 mm
5.43 x 2.04 x 1.42 inch
Net weight 357 g
13.12 oz.
Signal / noise ratio 85 dB (A)
Equivalent noise level 9 dB (A), according to IEC 60268-1
Dynamic range of FET mic. Amp. 129 dB (A)
Max. SPL for 0,5 % THD

138 dB, 0 dB pre-attenuation
158 dB, 20 dB pre-attenuation

Pre-attenuation pad 20 dB / switchable
Low cut 12 dB / octave at 80 Hz
Rated impedance < 150 ohms
Rated load impedance > 1.000 ohms
Supply voltage 48 V +/- 4 V
Current consumption 5.5 mA

Skriv en produktanmeldelse og del dine erfaringer med dette produktet med andre kunder.